Ipod™ (Optional); Playback; Searching For A Desired Song; Searching By Playlist - Alpine DVA-9861 Mode D'emploi

iPod™ (Optional)
Rotary
SOURCE/
encoder
POWER
FUNC.
MODE
An iPod™ can be connected to the DVA-9861 by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i). When the
DVA-9861 is connected by using the cable, the controls on the iPod™
are not functional.
About iPod™ usable with this unit
The unit can be used with third generation and above iPod™, iPod™
photo, iPod™ mini or iPod™ nano. iPod™ Shuffle cannot be used,
however.
• Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
• The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Forth generation iPod: Ver 3.0.2
iPod photo: Ver.1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
• The unit cannot be used with the software versions earlier than 2005-
02-22. For details about "iPod Software Update," refer to the iPod
Instruction Manual.

Playback

1
Press SOURCE/POWER to switch to the IPOD
mode.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
3
To pause playback, press
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
DVA-9861, it will continue playing after the connection.
6
/ 4 5
Buttons TITLE
1 through 6
/ .

Searching for a desired Song

An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the DVA-9861 can use these to ease song
searches.

Searching by Playlist

1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the PLAYLIST
search mode, then press
PLAYLIST ARTIST
3
1
* Turn the Rotary encoder to select the desired
Playlist.
4
Press / .
The selected Playlist is played back.
To search for a song in the selected playlist
1 After selecting the playlist in step 3*
to the song search mode of the selected playlist.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• All songs in the iPod are played back by selecting the stored "iPod
1
name" in step 3* .
• Playlist search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to "Direct Search Function" (page 46).
• "NO SONG" will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.

Searching by artist name

1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST
search mode, then press
PLAYLIST ARTIST
3
*2
Turn the Rotary encoder* to select the desired
Artist.
4
Press / .
The selected Artist song is played back.
To search for an album of the selected artist
1 After selecting the artist in step 3*
to the album search mode of the selected artist.
*1
2 Turn the Rotary encoder* to select an album.
3 Press the / to play back all songs of the selected
album.
.
ALBUM SONG PLAYLIST
1
, press to change
for at least 2
.
ALBUM SONG PLAYLIST
2
, press to change
45
-EN