Poulten & Graf OPTIFIX FORTUNA Mode D'emploi page 12

Preface
We thank you for the purchase of an OPTIFIX
choice. With 40 years of experience in making dispensers we guarantee a high standard
of product quality and safety. In order to guarantee the quality and safety of the dis-
penser for long term dosing of liquids, correct operation and maintenance are required.
Therefore please read this operating manual carefully before using the dispenser and
take note of the warning instructions as well as the corresponding regulations. Please
keep it for later reference.
The pack contains: 1 dispenser (valve block unit with finger guard), 1 discharge tube
set, 1 intake tube, 2 adapters GL 40+45 (model
SAFETY, SAFETY S
model
this before using the dispenser.
Please pay attention to the colour code of our bottle top dispensers:
BASIC, SOLVENT,
Operating Manual Bottle Top Dispenser OPTIFIX
I. Safety Instructions
1. Before using the dispenser please read the operating manual carefully
and follow the safety instructions.
mention all safety risks that might be associated with the use of the dispenser.
It is therefore in the responsibility of the user to consult where necessary
and establish appropriate health and safety practices to determine the
applicability of regulatory limitations prior to use.
2. Observe general notes on hazards and safety regulations, e. g. wear
protective clothing, gloves and glasses.
3. Observe any hazard symbols on reagent bottles.
4. Use only appropriate containers to dispense liquids. If using small bottles,
please use a stand.
5. Always make sure that the discharge tube never points at the user or any
other person.
6. When transporting the dispenser please ensure that the piston is in zero-
position and no liquid is in the cylinder.
12–56
ENG
and HF: made of PTFE), 1 operating manual. Please check
SAFETY, SAFETY S,
This operating manual cannot reasonably
!
bottle top dispenser. You made a good
®
BASIC and SOLVENT: made of PP;
HF
®