Silverline 261884 Mode D'emploi page 4

GB
Description of Symbols
Carefully read and understand these instructions and any label attached
to the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted with
these instructions.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
Toxic fumes or gases!
Double insulated for additional protection.
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
V Volts
~
Alternating current
A Ampere
n
No load speed
o
Hz
Hertz
W, kW Watt, kilowatt
/min or min
-1 (revolutions or reciprocation) per minute
4
Original Instructions
Specification
Voltage: ........................................................230-240V~, 50Hz
Power: ...........................................................................1010W
No-load speed: ............................................... 1000-4500min
Spindle thread: .................................................................. M14
Sanding pad diameter: .................................................180mm
Cable length: ....................................................................2.0m
Ingress protection: ............................................................. IP20
Protection class: ...............................................................
Weight: .......................................................................... 2.26kg
Sound and vibration information:
Sound pressure L :..................... .................................88dB(A)
PA
Sound power L :........................ .................................99dB(A)
WA
Uncertainty K: .....................................................................3dB
Weighted vibration ah:.................... ............................5.79m/s²
Uncertainty K:............................. ..................................1.5m/s²
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increa sed levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time
General Safety
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience
or knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the
appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
-1