Infusion Stand - wissner-bosserhoff sentida 7-i Notice D'utilisation

7.3 Infusion stand

The infusion stand is only intended for attaching infusions. Do not attach infusion pumps here.
The infusion stand is only intended for attaching infusions. Do not attach infusion
pumps here.
The holder for the infusion stand is located at the head end of the patient surface frame.
If you want to attach an infusion stand:
▪ From above, insert the infusion stand into the holder.
▪ Turn the infusion stand, so that the bolt lies in one of the notches provided in the holder.
98
Maximum 2 kg per hook
Infusion stand