7.6 Integrated linen holder
The integrated linen holder is permanently installed in the lying surface and can be pulled out
through a recess in the footboard. It serves for temporarily putting linen or other objects down
during the nursing care process. Assembly instructions are available from wissner-bosserhoff
for later extension.
▪ To pull out the linen holder, hold the aluminum bar and pull as required. If you need it, you
may fold out the bracket.
▪ To retract the linen holder, fold down the bracket and carefully push the linen holder in until
it clicks into place.
Attention!
With moving accessories, there is a risk of entrapment. Move the accessories
carefully in order to avoid squeezing.
Do not load the linen holder with more than 15 kg.
7.7 Accessories holder
The accessories holder serves for hanging urine bag holders, urine bottle holders or similar
accessories on it. It is attached to the side panel.
The maximum load on the accessory holder is 2 kg.
2
1
101