wissner-bosserhoff sentida 7-i Notice D'utilisation page 75

Caution!
The side panels' anchoring could come loose under high load. Only move the bed
at its head or foot end.
Attention!
Injuries could be caused if feet or other body parts get caught in the moving castors
or the undercarriage cladding when moving the bed. When moving the bed, make
sure that your foot does not get caught in the moving castors or the undercarriage
cladding.
Caution!
Power supply connection cables could break when they are run over. Never run over
power supply cables or other cables.
The nursing bed sentida 7-i is equipped with a spiral cable. A plastic hook is attached to the
spiral cable.
▪
If you want to move the nursing bed sentida 7-i, hang the power supply connection cable´s
hook to the upper edge of the head end. Thus, you can avoid that the power supply connec-
tion cable is run over.
▪
Regularly check the power supply connection cable, the correct insertion of the power plug,
the power plug cover and the housing openings on the bed for signs of damage, in order to
rule out hazards.
75