Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.2. P
SAP-300
ROGRAMMING WITH THE
DISPLAY UNIT
When entering the menu the instrument makes a copy of the actual parameters, all changes are done to this duplicated parameter set. During programming the
instrument keeps measuring and transmitting with the current (and intact) parameter set. After exiting the menu the instrument replaces the original parameters
with the new parameter set and will measure according the new parameters. This means that the change of the parameters does not become immediately
E
E
effective when pressing the
button! Entering the menu can be done by pressing the
button while exiting the menu can be done by pressing the
button.
If the instrument is left in programming mode after 30 mins it will automatically return to measuring mode. If the SAP display is removed during programming the
instrument immediately returns to measuring mode.
As programming with SAP-300 (manual programming) and HART (remote mode) programming is not possible at the same time use only one programming
method at a time. Measured values can be read out through HART at any time.
5.2.1. Elements of the programming interface
The parameters of the instrument are grouped according to their functions. The programming interface consists of lists, dialog windows, edit windows and report
windows.
Lists
E
Navigation between the lines of a list can be done by pressing
/
buttons. Pressing the
button
activates a list item. Selected list item is marked with inverse colour. Exit from a list by pressing the
button.
Menu list
Menu list is a specialized list. Its characteristic is that upon selecting a list item we directly get into another list,
and these lists are opening from each other in different levels. The menu header (1) helps to navigate. Entering
E
the menu can be done by pressing the
button. Navigation between the menu items can be done by
E
pressing the
/
buttons. Enter to the selected menu by pressing the
button. The selected list item is
marked with inverse colour. Exit from a submenu with button. Pressing the
button in the main menu will
exit programming mode and the instrument will return to measuring mode.
22 / 36 mba5052i0600p_06 ♦ BKI16ATEX0012X ♦ IEC Ex BKI 12.0002♦ FM16US0068X♦ FM16CA0037X
Publicité
Table des Matières
