Edge Guide - Skil RT1322-00 Mode D'emploi

"Live Tool Indicator" Light
(Fig . 12)
Your router also has a "Live Tool Indicator"
green light, located on the motor housing top
cap where the power cord enters the motor
housing. This green light is always on when
router motor is plugged into power source.

Edge Guide

The router kit includes an edge guide. This edge guide can be used as an aid in routing
applications such as decorative edging, straight-edge planing and trimming, grooving,
dadoing, and slotting.
To assemble the edge guide, insert two edge-guide rods into the holes on the edge guide, and
then use two screws (included) to lock the edge-guide rods in place.
To attach the edge guide to the fixed or plunge base, simply insert the edge-guide rods into
the edge-guide mounting slots either from the left or the right. Adjust the edge guide to the
desired position.
For fixed base, secure the edge guide by turning the edge-guide levers toward two handles
(Fig.13a); for plunge base, secure the edge guide by turning two edge-guide levers toward the
right hand (Fig.13b).
Fig. 13a
Edge Guide
Lever
LOCK
20
Edge Guide
Rods
Edge Guide
Screws
Fig. 12
Fig. 13b
LOCK
Edge Guide Levers
"Live Tool
Indicator" Light
LOCK