Releasing A Trapped Auger; Cleaning The Air Filter - Stihl BT 45 Notice D'emploi

English

Releasing a Trapped Auger

If the auger jams in the drill hole
Let go of the throttle trigger so that
N
the engine returns to idling speed.
Move rotary knob to R position
N
(counterclockwise rotation) – it may
be necessary to rotate the machine
a little until the knob can be moved
to the required position.
Hold the machine firmly with both
N
hands on the handles.
Operate the throttle trigger.
N
Increase engine speed and slowly
N
pull the drilling tool out of the drill
hole.
18

Cleaning the Air Filter

If there is a noticeable loss of engine
power
4
3
1
2
Set the choke lever to l.
N
Loosen the screw (1).
N
Remove the air filter cover (2).
N
Clean away loose dirt from around
N
the filter.
Take the air filter (3) out of the filter
N
housing (4).
Replace with a new filter – or, as a
N
temporary measure, knock it out or
blow it clear – do not wash.
Replace any damaged parts.
N
Install the filter in the filter housing.
N
Fit the filter cover, engage the two
N
tabs (arrows) at the bottom first.
Insert the screw and tighten it down
N
firmly.
BT 45