Stihl BT 45 Notice D'emploi page 14

English
Hold the filler cap down and turn it
N
clockwise until it engages
Fold down the bracket as far as it
N
will go
Checking the lock
The lug on the bracket must engage
–
entirely in the recess (arrow)
12
Grip the filler cap – if the filler cap
N
cannot be moved or removed, then
it is closed properly
If the filler cap can be moved or removed
The base of the filler cap is twisted in
relation to the upper part.
left: Base of filler cap twisted
right: Base of filler cap correctly
positioned
Fit filler cap and turn it
N
counterclockwise until it engages in
the seat of the filling port
Continue to turn the filler cap
N
counterclockwise (approx. 1/4 turn)
– this will twist the base of the cap
into the correct position
Turn the filler cap clockwise and
N
close it – see the section "Closing"
and "Checking the lock"
Filler cap with marking
To open:
Open bracket
N
BT 45