Stihl BT 45 Notice D'emploi page 18

English
Starting the Engine
4
1
Depress the choke lever (1) and set
N
it to
l if the engine is cold
j for warm start – also use this posi-
tion if the engine has been running
but is still cold.
Move the stop switch (2) to F and
N
squeeze the throttle trigger (3) and
N
hold it there.
Press in the starting throttle lock (4)
N
and hold it there.
Let go of the throttle trigger and
N
starting throttle lock. This is the
starting throttle position.
16
2
3
5
Press the manual fuel pump
N
bulb (5) at least five times.
Cranking
Place the unit on the ground so that
N
it is secure.
Press the machine against the
N
ground with your left hand on the
engine housing.
Pull the starter grip slowly with your
N
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
When engine begins to fire
Set choke lever to j and
N
continue cranking.
N
As soon as the engine runs
Blip the throttle trigger – the starting
N
throttle lock moves to the normal run
position and the engine returns to
idling speed.
Stopping the Engine
Move the stop switch to 0.
N
BT 45