Sonnenkonig TORONTO 14 Mode D'emploi page 45

Power supply mode of Battery
When the external AC is off or not plugged in, the unit is working via the Lithium battery
inside, all the operation is same. But all maximum gear of each mode will get down to 12
levels from 24 levels when external AC. The quantity of electricity charge will display on
the LED screen at the bottom of the unit. The 4 cell is all light means the electricity is full ,
If just one cell is light, it means the electricity is about to run out.
When the unit is plugged in, the unit will shift to AC power supply automatically, the gear
limitation is relieved automatically, and the lithium battery is charging at the same time.
The status of the charging will display on the LED symbol on the bottom, If 4 cell is all
light, it means the battery is full , the system will start micro current charge automatically,
it will bring any affect to the unit.
Usage of remote control
– After unpacking, the remote control and the battery are taken out from the package
box; the socket sleeve and the battery cover are dismounted; the battery is arranged
according to the anode and cathode; and then the battery cover is arranged.
– The remote control sleeve is inserted into the slot at the back of the fan; and then the
remote control is arranged in the socket sleeve (as shown in figure).
Other operation
– Press the button by a finger
without loosening (1); The
fan support is held by other
hand to adjust the support
up and down to the suitable
height(2); (3) After adjusting
the height, loosen the key.
45
EN