Assembly; Delivery Content; Mounting The Hopper; Mounting The Wheels - Zipper Maschinen ZI-HAEK4000 Manuel D'utilisation

12

ASSEMBLY

12.1 Delivery content

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
12.2 Assembly
The machine is delivered fully assembled. Only hopper and wheel have to be mounted.

12.2.1 Mounting the hopper

Place and align the hopper on top of the hopper seat.

Use the screws to fix the hopper on the machine.


12.2.2 Mounting the wheels

Stick the wheels on the wheel shaft.

Put a washer on the outside of the wheel.

Fix the wheel with a split pin.

After finalized assembly check all screw connections and retighten if
necessary!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HAEK4000
Make sure that you insert the contact plug on the hopper into the slot on the
machine when placing the hopper. The machine cannot be started without this
contact.
NOTICE
WARNING
ASSEMBLY
23