Makita HP330D Manuel D'instructions page 4

ENGLISH (Original instructions)
1. Battery cartridge
2. Button
3. Switch trigger
4. Lamp
5. Reversing switch lever
SPECIFICATIONS
Capacities
No load speed (min
Blows per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drilling
without impact in wood, metal, ceramic and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HAMMER DRIVER
DRILL SAFETY WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
4
Explanation of general view
6. Speed change lever
7. Action mode changing ring
8. Arrow
9. Adjusting ring
10. Graduation
Model
-1
)
-1
)
Overall length
Net weight
Rated voltage
ENE079-1
GEA010-1
GEB056-5
11. Sleeve
12. Blow-out bulb
13. Holster holder
14. Waist belt
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
High (2)
Low (1)
4. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. Hold the tool firmly.
7. Keep hands away from rotating parts.
8. Do not leave the tool running. Operate the tool
only when hand-held.
9. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
10. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
HP330D
8 mm
10 mm
21 mm
5.1 mm x 63 mm
M6
0 - 1,500
0 - 400
0 - 22,500
0 - 6,000
201 mm
1.1 kg
D.C. 10.8 V