De Dietrich EA 108 Notice Installation page 20

5 Debitmeter
Flow is regulated by activating the flow regulator and the pump
speed. Start by adjusting the flow regulator with a minimum pump
speed. If the desired flow cannot be obtained by adjusting the screw,
increase the pump speed by one notch.
1 Flow readout
2 Adjustment screw
20
X: Loss of pressure - mbar
Y: Flow rate - l/h
X: Operating pressure - bar
Y: Operating temperature - °C
The operating temperature may exceed 100°C for short periods.
Technical characteristics
Dimensions
Ø 20 mm
EA 108
Loss of pressure
Pressure / Temperature
Range of adjustment
4 - 36 l/min
10/04/06 - 300008150-001-B
Kvs
3
3.5 m /h