Télécharger Imprimer la page

Fritel CW 2435 Mode D'emploi page 15

Masquer les pouces Voir aussi pour CW 2435:

Publicité

Les langues disponibles

Les langues disponibles

The appliance is now ready for use.
ATTENTION : For warming up the appliance, it must ALWAYS be in closed position.
ATTENTION: Upon the first use, there might be a slight odour or smoke output. This is normal.
3. USE AND OPERATION
Thermostat button + control lamps (1-2-3)
The appliance is equipped with a thermostat button (6 positions, 1 = light golden, 5 = dark
crusty and 6= meat and bbq) and with a red (3) and green (2) control lamp. The red lamp
lights up when the appliance is plugged in and the green lamp lights up when the
selected temperature is reached.
Upright system (8)
For your convenience the appliance will stay opened at 105°. With the sliding system at
the left side, you entirely open the appliance at 180° and transform it into a barbecue
(grill surface 41x26 cm), where both places are perfectly joined together.
To do this, pull the sliding system in your direction and hold it in this position while you
are opening the appliance to 180°.
Removable plates (4)
By means of the clip (5) you can easily remove the plates from the appliance for an easy
cleaning or for switching plates.
Sliding system on left handle arm (7)
To open the appliance to the 180° position for obtaining a very large grilling surface (i.e. BBQ), pull the
sliding system in you direction and hold it in this position while opening the appliance to 180°. In order
to switch plates, we advise you to do so when the appliance is in the 180° position.
- Flip-over system: For a perfect repartition of the dough and for an equal baking result,
the appliance disposes of a flip-over system to make you turn the appliance easily.
If you want to flip over the appliance, make sure to hold both handles together.
- Upright system at 105°: for your convenience you can open the upper lid to the 105°
position.
Completely unroll the power cord, open the appliance to the 180° position, rub in the plates with
some oil and plug in the appliance in a 230 V socket.
lights up when you plug in the appliance.
removed.
Then turn the thermostat knob onto the chosen position.
ATTENTION: the appliance will now get hot. Only touch the thermostat knob and the handles.
Close the appliance. The red control lamp
NEVER plug in the appliance when the plates are
15

Publicité

loading

Ce manuel est également adapté pour:

Cw 2425