Franke KEP AC-SBF Serie Installation page 8

SECTION 2: PRESSURIZING THE COOLING TANK
A. NON-PRESSURIZED COOLING TANK (continuation)
STEP 4
Plug un-insulated tubing that was removed in Step 1 into
JG elbow leading to the cooling tank from Step 3.
STEP 5
Unplug tubing that is onnected to the water valve outlet
(JG elbow located on the right side of valve facing the
cooler.
STEP 6
Connect tubing from Step 5 to JG elbow on the left side of
the valve.
02/20 | 2000102863_KEPAC-SBF 8