Franke KEP AC-SBF Serie Installation page 7

SECTION 2: PRESSURIZING THE COOLING TANK
A. NON-PRESSURIZED COOLING TANK (continuation)
STEP 1
Unit as it appears with top removed.
STEP 2
Unplug un-insulated water line from water valve inlet (JG
elbow located left side of water valve facing the front of
the cooler). Set tubing aside (being careful to not con-
taminate the water contact in of the tube).
STEP 3
Unplug tubing from JG elbow leading to cooling tank inlet.
02/20 | 2000102863_KEPAC-SBF 7