Franke KEP AC-SBF Serie Installation page 14

SECTION 4: MOUNTING THE FRAME TO THE WALL (cont'd)
STEP 6:
Attach Bottle Filler assembly and top cap to the frame using the six (6) vandal resistant torx screws. (Figure 15)
STEP 7:
Install the drip tray and anti-splash grate into the alcove area and secure with the two (2) stainless steel Phillips head screws. (Figure 16)
STEP 8:
Turn ON water supply and check for leaks. Press the activation button and release any trapped air from the system. Plug in the power cord and
replace the front panel IF it was removed earlier. (Figure 17)
02/20 | 2000102863_KEPAC-SBF
Figure 15
Figure 16
Anti-splash
grate screws
(provided)
Anti-splash
grate
Drip tray
Torx screws
INSTALLATION COMPLETE
Figure 17
Press
14