Franke KEP AC-SBF Serie Installation page 11

ALIGN DASHED EDGE WITH LEFT EDGE OF COOLER TOP
3 1/4"
[8.25 cm]
FROM SIDE
2 1/8"
[5.4 cm]
FROM BACK
Mark this center point on the.
top. Remove the top from the
cooler. Then drill a 3/8" [9.5mm] hole
through the top at the marked
center point.
USE THIS TEMPLATE TO MARK THE HOLE
LOCATION ON COOLER TOP
02/20 | 2000102863_KEPAC-SBF 11