Franke KEP AC-SBF Serie Installation page 5

SECTION 1: GETTING STARTED
NOT PRE-DRILLED/BOTTLE FILLER KIT:
If the unit is not pre-drilled or you purchased a BOTTLE FILLER retrofit KIT,
go to PAGE 6A.
PRE-DRILLED/PLUMBED:
If your unit was purchased pre-drilled and plumbed at the factory as a COMBINATION, go to PAGE 12C.
WHAT'S INCLUDED?
1. Top cap
2. 38" of 1/4 OD plastic tubing with 19" of sponge tubing insulation
3. Gasket
4. Quick connect tee fitting (only required on split level models)
5. Installation instructions
6. Drip tray
7. Anti splash grate
8. Anti Splash grate screws (2)
9. Snap bushing
10. Wrap-around cabinet facing
11. Hands-free sports bottle filler
2.
3.
4.
5.
02/20 | 2000102863_KEPAC-SBF
1.
10.
11.
TOOLS REQUIRED:
- 3/8" drill bit that will drill through stainless steel top
- Electric drill
- Small tubing cutter for copper tube
- T15 Torx driver with pin in head vandal tip
- T20 Torx driver with pin in head vandal tip
- 1/4" nut driver
- #2 Phillips screw driver
6.
9.
7.
8.
5