Storch VacTec Mode D'emploi page 29

Replaceable waste bags
1. Remove the adapter (2) from the container (1); remove the support ring (6). and remove the full waste bag from the
drum.
2. Insert the support ring (6) approx. 10 cm into the opening of the new waste bag.
3. Fold the 10 cm protruding section inward over the support ring (6) (Fig. 4).
4. Put the waste bag and support ring into the container so that it rests on the 4 rubber puffers at the top of the con-
tainer.
5. Then put the adapter (2) back on the container (1).
Fig. 3 Fig. 4
6
29