Storch VacTec Mode D'emploi page 27

Fig. 1
The following basic equipment is included (see Fig. 1):
Pos. Art. No. Designation
1 62 81 01 Mobile container
2 65 69 15 Adapter
3 62 81 02 Lid with connecting piece
4 62 81 03 Suction hose (10 m)
5 62 81 04 Vacuum cleaner connecting hose (1.5 m)
6 62 81 05 Retaining ring for waste bag
59 70 10 Waste bag
By default the connecting hose is configured for use with the STORCH VacTec unit. If you are using the STORCH Vari-
oVac, modify the connecting hose as follows:
1. Unscrew the vacuum cleaner connecting sleeve from the hose on your VarioVac (turn clockwise).
2. Remove (pull off) the vacuum cleaner connecting sleeve from the connecting hose (5).
3. Now screw the free end of the connecting hose onto the sleeve on your VarioVac (turn anti-clockwise)
27
Number
1
1
1
1
1
1
1