Operating Instructions - Kenmore CSV|Go XL Manuel D'entretien Et D'utilisation

CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT
touch the brush roll when vacuum is on. Contacting the brush
roll while it is rotating can cut, bruise or cause other injuries.
Always turn off before servicing. Use caution when operating
near children or pets.
The on/off trigger button is located on
the inner side of the hand vacuum handle.
The vacuum has two-speed controls, ECO
and HIGH. Change speed by pressing the
speed change button shown below.
On/Off
Button
CAUTION
Operate the appliance at room
temperature between 39.2°F (4°C) and
104°F (40°C) in order to ensure safe and
normal function.
Before vacuuming floors, connect the
motorized nozzle to the wand. Then
connect the hand vacuum to the wand. The
motorized nozzle can be used for cleaning

OPERATING INSTRUCTIONS

CONTROL BUTTONS
Speed
Change
Button
VACUUM OPERATION
Battery Power Level Indicator
The battery power level indicator lights up
to give you an idea of how much battery
power remains at any given time.
Battery Power Level
Indicator
Blue, Continuous
Green, Continuous
Yellow, Continuous
Red, Continuous
Red, Flashing
NOTE:
Please remove the battery
indicator label before first use.
carpets or rugs, as well as hard floors.
- 11 -
Battery Capacity
75%~100%
50%~74%
25%~49%
(Recharge
recommended)
10%~24%
0~9%
(Recharge required)