CAUTION
Moving parts! To reduce the risk of personal injury, DO
NOT touch the brushroll when vacuum is on. Contacting the
brushroll while it is rotating can cut, bruise or cause other
injuries. Always turn off after operation. Use caution when
operating near children or pets.
1. Turn the upper cord hook to either side
and down to release the power cord.
WARNING
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
2. Detach the power cord plug from the
power cord.
3. Be sure the power cord is locked into
the upper locking notch as shown. This
will help manage the power cord when
operating the vacuum cleaner.
OPERATING INSTRUCTIONS
POWER CORD – RELEASE & USE
Upper Cord
Hook
4. Plug the power cord plug into an outlet
located near the floor.
- 10 -
Upper
Locking
Notch