Assembly Instructions - Kenmore CSV|Go XL Manuel D'entretien Et D'utilisation

Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use this list to
verify that you have received all the components of your new Kenmore CSV Go Cordless
Stick Vac.
1. Insert the hand vacuum into the top of
the wand until you hear a click.
2. Insert the bottom of the wand into the
motorized nozzle until you hear a click.
3. Use the 2 screws provided to mount the
bracket on the wall, but not to drywall
only. Secure the screws to a stud. Mount
at a recommended height of 59'' and
no less than 44'' above the floor. Ensure
that no plumbing or electrical cables,
wires or ductwork are located directly
behind the mounting area.

ASSEMBLY INSTRUCTIONS

Click
Click
- 9 -
4. Hang the hand vacuum on the wall
mount. Align the base of the hand
vacuum with the wall mount and slide in
as shown in the picture below.
NOTE:
To be able to charge vacuum
while it is mounted, attach bracket to wall
no more than 59'' from wall electrical
outlet.