Kenmore CSV|Go XL Manuel D'entretien Et D'utilisation page 14

EMPTYING DUST CUP AND CLEANING FILTER
2. Remove the HEPA media filter and pre-
filter basket from the dust cup.
HEPA media Filter
Pre-filter Basket
Dust Cup
3. Brush loose debris from HEPA media
filter and pre-filter basket and then rinse
with warm water. Set both filters aside
and allow to air dry for 24 hours.
IMPORTANT:
and pre-filter must dry completely before
reuse.
4. Place the pre-filter basket back into the
dust cup, then place the HEPA media
filter back into the pre-filter basket.
The HEPA media filter
5. To reassemble the dust cup to the hand
vacuum, align the tabs on the dust cup
with slots in the hand vacuum. Once
aligned, attach the dust cup to the hand
vacuum until you hear a click.
- 14 -