Operating Instructions; Getting Started - Kenmore 592.30413 Manuel Du Propriétaire

OPERATING INSTRUCTIONS

CAUTION
Do not pull the power cord beyond
the yellow indicator and take care
when rewinding the power cord to
prevent the plug hitting the vacuum
or the user.
1. Pulling out the power cord to release
the power cord.
2. Make sure the power cord is placed
into the cord clip on the body as
shown. This
helps keep the
power cord out
from under the
vacuum cleaner
nozzle.
WARNING
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified
electrician to install the proper
outlet. Do not change the plug in
any way.
DJ68-00514A-00.indd 9
All manuals and user guides at all-guides.com

GETTING STARTED

3. Plug the polarized power cord into a
4. The power switch is located on the top
Yellow Indication
5. Upon finishing cleaning, disconnect
9
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in the ON
position. Personal injury or damage
could result.
• DO NOT use outlet above counters.
Damage from cord to items in
surrounding area could occur.
120Volt outlet located near the floor.
of the vacuum body. Push the rocker
switch "ON" to vacuum, and "OFF"
when cleaning is complete.
OFF
ON
the plug from the electrical outlet and
press the
cord rewind
button lightly
with your
toe.
CAUTION
When removing the
plug from the electrical
outlet, grasp the plug,
not the cord.
2009.8.22 9:19:26 AM