Identiication Plate - DRENO V2 Manuel D'utilisation Et D'entretien

3. Identification plate
European Version CE
Via Umbria 15 Monselice (PD) ITALY
18
0477
EPT 17 ATEX 2702 X
Type
1
Hz
kW
3
V.
6
Hm
9
11
CL.IS.F IP68 Year: 12
*the -EX acronym indicates that the pump is ATEX certiied
INTERPRETATION OF THE NAME PLATE (ATEX marking strings)
1
1 European Parliament and Council Regulation (CE) no. 765/2008 dated July 9, 2008 annex II conformity symbol.
2 Equipment group. Group II: electrical equipment for use in potentially explosive atmospheres due to gas, other
than mines.
Equipment category subject to certiication for potentially explosive atmospheres certiication due to Gas, Mist (G).
3
The equipment can be installed in zone 1.
4 The electrical protection mode used for equipment corresponding to the protection by explosion proof case - suited for
gases in groups IIB and IIA.
5 The mechanical protection mode for equipment is through emersion h – suited for gases in groups IIB and IIA.
6 Equipment temperature class (maximum surface temperature 135°C).
7 Equipment with high protection level (EPL Gb), suitable for installation in Zone 1.
8 Working temperature.
www.drenopompe.it
Ex db IIB T4 Gb
16
II 2G
Ex h IIB T4 Gb
17
0°≤ Ta ≤ 40°
S/N
R.p.m.
4
A.
7 COS
Q l/sec
14
°C
13
20m
Ex db IIB T4 Gb
2 3
II 2G
Ex h IIB T4 Gb
8
2
5
8
10
Kg.
15
4
5
0°≤ Ta ≤ 40°
- 28
1 Electric pump code*
2 Serial number
3 Rated power P2
4 Frequency
5 Revolutions per minute
6 Voltage
7 Absorption
8 Power factor
9 Head (meter)
10 Flow rate (litres / second)
11 Insulation class
12 Year of production
13 Maximum submersion
14 Maximum operating temperature
15 Weight
16 Standard of reference
17 Certiicate number
18 Authority number
6 7