Publicité
Les langues disponibles
Les langues disponibles
2. Use keys
and
grams (Pc, P1, P2, P3 or P4-L).
Pc
This is the continuous program (see in its sec-
tion).
P3
Means that the program P3 is short (one tem-
perature sign).
P4-L
Means that the program P4 is long (two tem-
perature signs).
Modification of temperatures
Note: Programs cannot be edited whilst underway.
1. Select the program you wish to modify.
2. Press the key
of the program selected.
o
C1
Consigned temperature.
o
70
3. Press the key
temperature ºC2.
o
C2
Consigned second temperature.
o
100
4. Use the keys
and
5. Press the key
lection. The values modified will be saved in the
memory automatically.
Note: If you have selected a short program and you
wish to program a long one, hold down the
key
whilst ºC1 is showing in order to
gain access to ºC2.
Program a ºC2 temperature higher than ºC1,
and you will gain access to the rest of the pa-
rameters for the long program.
Modification of times
Note: Programs cannot be edited whilst underway.
1. Select the program you wish to modify.
2. Press the key
t ºC1.
o
t
C1
Maintenance time for the first tem-
perature.
1h30
3. Use the keys
and
to select one of the 5 pro-
to modify the temperature ºC1
again to modify the second
to modify the values.
again to return to program se-
to modify the maintenance time
to modify time t ºC1.
4. Press the key
to the second temperature r ºC2.
o
r
C2
Time for temperature rise slope to
the second temperature.
0h30
5. Press key
again to modify the maintenance
time t ºC2.
o
t
C2
Maintenance time for the second
temperature.
0h30
6. Use the keys
and
7. Press the key
lection. The values modified will be saved in the
memory automatically.
Note: If you have selected a short program and you
wish to program a long one, hold down the key
whilst ºC1 is showing in order to gain ac-
cess to ºC2.
Program a ºC2 temperature higher than ºC1,
and you will gain access to the rest of the pa-
rameters for the long program.
Operation
1. Open the lid and pour water into the tank.
2. Activate the main switch located on the back of the
device (K). The green light will come on.
3. Select the program you wish to run.
4. Press key
. The program will start up.
The pilot light next to key
ing that it is heating up, and will remain with a con-
stant light once the consigned temperature is reached.
5. To terminate a program which is underway, hold
down the key
When the cycle is underway, holding the
key down for 3 seconds enables you to
visualise the current temperature.
When the cycle is running, holding the
key down for 3 seconds enables you to
visualise the time remaining for the
phase underway.
again to modify the rise slope
to modify the values.
again to return to program se-
To open the lid, press
the red button on the
handle and turn to the
right.
will blink, indicat-
for a few seconds.
Publicité
