Télécharger Imprimer la page

Mestra Autopol Geisser Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

Water outlet 
5. An accesory is available to work at 1.5 bar (L).
Ref. 030425-45.
6. To discharge water, open the water valve (F) situat-
ed on the right side of the machine (as long as the
bottle has been correctly connected).
7. Connect the device to a suitable electrical connec-
tion with proper earthing.
Use of the keys
Program selection.
Edition of time and temperature val-
ues.
Access to edition of temperatures.
When the cycle is underway, holding
the button down for 3 seconds enables
you to visualise the current tempera-
ture.
Access to edition of times.
When the cycle is underway, holding
the button down for 3 seconds enables
you to visualise the time remaining for
the phase underway.
Short push: cycle startup.
Long push: end of cycle.
Activate and deactivate the entry of
pressure.
230 V
 Air inlet
Polymerisation programs
There are three types of program: short, long and con-
tinuous.
Short programs:
Consist of a consigned polymerisation temperature ºC1
and a maintenance time t ºC1.
Long programs:
Consist of a preheating temperature ºC1,
a maintenance time t ºC1,
a temperature rise slope r ºC2,
a consigned polymerisation temperature ºC2
and a maintenance time t ºC2.
Short program: if ºC2 is programmed lower than ºC1.
Long program: if ºC2 is programmed higher than ºC1.
Continuous program:
This is a short program which keeps temperature in or-
der to let any user starting a new polymerisation cycle at
any time.
Default programs
The pot leaves the factory with the following programs:
Pressure
ºC1
P1
Auto
45
P2
Auto
55
P3
Manual
100
P4-L
Manual
70
Pc
Auto
55
Pc
This is the continuous program (see in its section).
P3
Means that the program P3 is short (one tempera-
ture sign).
P4-L
Means that the program P4 is long (two tempera-
ture signs).
Program selection
1. Press the main switch (K) and wait until the display
stabilises.
P1
Program selected (short).
45º
Consigned temperature.
P4-L
Program selected (long).
o
70
C
Consigned temperature ºC1.
o
100
C
Consigned temperature ºC2.
t ºC1
r ºC2
ºC2
0h15
-
-
0h15
-
-
0h30
-
-
1h30
0h30
100
0h15
-
-
t ºC2
-
-
-
0h30
-

Publicité

loading

Ce manuel est également adapté pour:

030425