Installation - Sonnenkonig BAGNO 450 Mode D'emploi

3 Installation

Note: The kit supplied in the package is designed for mounting ver-
tically on a solid wall� If mounted onto other types of walls, you will
need appropriate fixings (not supplied)� Please make sure the wall is
safe to mount� We highly recommend to have the panel installed by a
qualified electrician or installer authorized by SONNENKÖNIG�
41
1� Use the sup-
plied template to
mark the position
of the holes on
the wall�
2� Drill holes
using a 8mm drill�
3� Insert the do-
wels into the ho-
les�
4� Screw in the
supplied screws to
the wall�
5� Mount the pa-
nel on the screws�
6� Slide the panel
down, left and
down again until
it is secured�
EN