English - HIKVISION DS-2CD2666G2-IZS Mode D'emploi

Interface Description
LAN(PoE) Network interface, PoE
supported
DC12V, Power input interface
AC24V
MicroSD card slot
Insert the MicroSD card
MicroSD
for local storage
RESET One-key reset button
AUDIO IN Audio input interface
AUDIO OUT Audio output interface
Note: The interface varies with the models. Please refer to the product datasheet
for details.
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its
affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision. Unless otherwise expressly stated herein,
Hikvision does not make any warranties, guarantees or representations, express or
implied, regarding to the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the company website (https://www.hikvision.com).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement

and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions. Other trademarks and logos mentioned below
are the properties of their respective owners.

Other trademarks and logos mentioned are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND
THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO
Interface
ALARM IN
ALARM OUT
RS-485
DC12V, GND /
DC 12V_OUT
BNC
4

English

Description
Alarm input interface
IN1 and GND1, IN2 and
GND2 are two pairs of
alarm inputs
Alarm output interface
1A and 1B, 2A and 2B,
3A and 3B are three
pairs of alarm outputs
D+ or D- connect to
485
Power output
interface
BNC/CVBS interface
Grounding