Operation - Bartscher WB2110 Mode D'emploi

Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

5.2 Operation

Before the first use
•
Make sure the device is disconnected from the power supply.
•
The device should be thoroughly cleaned before the first use. Follow instructions in
section 6 "Cleaning and maintenance".
•
Make sure that all water drain taps are closed. Follow the instructions ON (OFF)
on the water drain taps.
NOTE!
Follow the principle BG "Work in gastronomy" of industry commision
"Food products and stimulants" issued by BGZ (BGR 111).
Device start-up
•
Connect the device to the single grounded socket.
•
Fill the selected basins with water.
NOTE!
Fill the heat maintaining basins with hot water to reduce energy consumption
costs and use the device more efficiently. Use demineralized water to maximize
the device life.
- 35 -