Minute Minder - AEG ITE42600KB Notice D'utilisation

glass ceramic is heated by the heat of the
cookware.
The indicators /
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even
if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
5.4 Timer
Count Down Timer
Use this function to specify how long a
roasting zone should operate during a single
cooking session.
Set the temperature for the appropriate
roasting zone and then set the function.
1. Touch to activate the function or
change the time.
The timer digits
and come on the display.
and turns white.
If the timer is not set, all indicators disappear
after 4 seconds.
2. Touch or
minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
and disappear.
When the time comes to an end, a signal
sounds and blinks. To stop the signal,
touch .
To deactivate the function: touch
indicators and
to set on the display. Alternatively, set
the heat level to 0. As a result, a signal
sounds and the timer is cancelled.
66 ENGLISH
/ appear when a
and the indicators
turns red,
to set the time (00 - 99
,
stays red.
. The
come on. Use or
CountUp Timer (The count up
timer)
You can use this function to monitor how
long a roasting zone operates.
Touch twice to activate the function.
The indicator
count up automatically.
To deactivate the function: touch
the indicators light up, touch

Minute Minder

You can use this function when the appliance
is activated but the roasting zones do not
operate.
To see the control panel, place a pot on a
roasting zone.
1. Touch
to activate the function.
2. Touch
The function starts automatically after 4
seconds. The indicators
disappear.
When you set the function, you can remove
the pot.
When the time comes to an end, a signal
sounds and
the signal.
To deactivate the function: touch
indicators
to set on the display.
The function has no effect on the
,
operation of the roasting zone.
5.5 Lock
You can lock the control panel while the
appliance operates. It prevents an accidental
change of the temperature.
You need to activate the function
for each appliance separately.
Set the temperature first.
turns red, the timer starts to
.
, until the indicator
or to set the time.
, , and
stays red.
flashes. Touch
and light up. Use
. When
turns red,
to stop
. The
or