12
www.aeg.com
To deactivate the function, touch
cooking zones operate independently.
5.6 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.
Touch
to activate the function for the
cooking zone.
The symbol turns red.
The function deactivates automatically.
For maximum duration
values, refer to "Technical
data".
5.7 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
First set the heat setting, then set the
function.
1. Touch
change the time.
The timer digits
and
red, and
to activate the function or
and the indicators
come on the display.
turns white.
If the timer is not set, all indicators
disappear after 4 seconds.
2. Touch
99 minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
, and
When the time comes to an end, a signal
sounds and
signal, touch
To deactivate the function: touch
indicators
to set
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
. The
CountUp Timer (The count
up timer)
You can use this function to monitor how
long a cooking zone operates.
Touch
The indicator
starts to count up automatically.
To deactivate the function: touch
When the indicators light up, touch
Minute Minder
You can use this function when the hob is
activated but no cooking zone operates.
To see the control panel, place a pot on
a cooking zone.
1. Touch
red, to activate the function.
2. Touch
The function starts automatically after 4
seconds. The indicators
disappear.
When you set the function, you can
remove the pot.
When the time comes to an end, a signal
sounds and
turns
stop the signal.
or
to set the time (00 -
disappear.
stays red.
flashes. To stop the
.
and
come on. Use
on the display.
twice to activate the function.
turns red, the timer
, until the indicator
or
to set the time.
,
stays red.
flashes. Touch
,
. The
or
.
.
turns
, and
to