Publicité
Les langues disponibles
Les langues disponibles
Fig. 3
Carabiner hook
m
WARNING!
In case of emergency, tug the quick-release
latch on the shoulder strap. The machine will be released from
the strap (Fig. 4).
Fig. 4
Operation
Connecting to Power Supply
This product is designed with a cord restraint hook that
prevents the extension cord from disconnecting during
operation.
1. Only connect the electric pole hedge trimmer to a working
120V outlet using a heavy-duty outdoor extension power
cord.
2. Make a loop in the extension cord and push it up through
the hole in the handle and around the cord restraint hook,
then connect the extension cord to the appliance cord
(Fig. 5).
Bracket
m
glasses with side shields when operating power tools. Failure
to do so could result in objects being thrown into your eyes,
resulting in possible serious injury.
m
not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
Starting + Stopping
m
Quick-release latch
objects before turning on the pole hedge trimmer.
Adjusting the Telescoping Pole
9
Fig. 5
Cord restraint hook
Extension cord
Appliance cord
WARNING!
Always wear safety goggles or safety
WARNING!
Do not use any attachments or accessories
WARNING!
Ensure the blade does not touch any
1. To turn the tool ON, push and hold the safety lock button
(located on the rear handle) with your thumb and then
squeeze the trigger switch with your fingers. Once the tool
is running, you can release the safety lock button (Fig. 6).
Fig. 6
Trigger switch
2. To turn the tool OFF, release the trigger switch (Fig. 6).
NOTE: Do not press the trigger switch until you are ready
to make a cut.
1. Disconnect the pole hedge trimmer from the power supply.
2. Unclip the cam-lock to release the pole (Fig. 7).
Safety lock button
Publicité
