Publicité
Les langues disponibles
Les langues disponibles
4. Ensure the trimmer head is locked in position when the
button is released.
NOTE: Failure to properly secure the trimmer head may
result in personal injury and/or property damage.
m
WARNING!
The trimmer head can be adjusted in six
different positions. Always ensure the head is securely locked!
Do not attempt to use the pole hedge trimmer with the head in
any other position or unlocked!
m
CAUTION!
Do not place your hand between pivoting
head and locking base. Failure to heed this caution could result
in a pinch point injury.
General Operation
1. Check the tool, its power cord and plug as well as
accessories for damage before each use. Do not use the
tool if it is damaged or shows wear.
2. Double check that the accessories and attachments are
properly fixed.
3. Always hold the tool on its handles. Keep the handles dry
to ensure safe support.
4. Ensure that the air vents are always unobstructed and
clear. Clean them if necessary with a soft brush. Blocked
air vents may lead to overheating and damage the tool.
5. Switch the tool off immediately if you are disturbed while
working by other people entering the working area. Always
let the tool come to a complete stop before putting it
down.
6. Do not overwork yourself. Take regular breaks to ensure
you can concentrate on the work and have full control
over the tool.
m
WARNING!
Ensure the extension cord will not touch the
blade during operating; there is danger of electric shock.
Trimming Times
Green leaf hedges
Evergreens
Conifers and other fast
growing shrubs
June to October
April to August
Every 6 – 8 weeks
Cutting Tips
m
WARNING!
Always hold the pole hedge trimmer with
both hands. Never hold shrubs with one hand and operate
pole hedge trimmer with the other. Failure to heed this warning
can result in serious injury.
m
WARNING!
Clear the area to be cut before each use.
Remove all objects such as cords, lights, wire, or loose string
which can become entangled in the cutting blade and create a
risk of serious personal injury.
• When operating the pole hedge trimmer, keep the extension
cord behind the pole hedge trimmer. Never drape it over the
hedge being trimmed.
• Do not force the pole hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
• Do not attempt to cut stems or twigs that are larger than
3/4 in. thick, or those obviously too large to feed into the
cutting blade. Use a non-powered hand saw or pruning saw
to trim large stems.
• If blades do become jammed, stop the motor, allow the
blades to stop, and disconnect the plug from the power
source before attempting to remove the obstruction.
• If desired, you can use a string to help cut your hedge level.
Decide how high you want the hedge. Stretch a piece of
string along the hedge at the desired height. Trim the hedge
just above the guide line of string. Trim the side of a hedge
so that it will be slightly narrower at the top. More of the
hedge will be exposed when shaped this way, and it will be
more uniform.
• Wear gloves when trimming thorny or prickly growth. When
trimming new growth, use a wide sweeping action, so that
the stems are fed directly into the cutting blade. Older
growth will have thicker stems and will be trimmed easiest
by using a sawing movement.
Using the Pole Hedge Trimmer
• Hold unit firmly with both hands. Always keep your left hand
on the telescoping pole and your right hand on the rear
handle. The unit is used for cutting in either direction in a
slow, sweeping action from side to side.
• Stand so that you are stable and balanced on both feet.
• Inspect and clear the area of any hidden objects.
• To protect yourself from electrocution, do not operate within
33 feet (10 m) of overhead electrical lines.
• Never use the pole hedge trimmer near power lines,
fencing, posts, buildings, or other immovable objects.
• Never use a blade after hitting a hard object without first
inspecting it for damage. Do not use if any damage is
detected.
11
Publicité
