Horizon Fitness PARAGON X Guide De Montage page 7

ASSEMBLY STEP 1
B
Z04x4
Z03x4
Z01x4
C
12
HZ19_AG_Paragon X v1_0_A.indd 12-13
Open HARDWARE FOR STEP 1.
A Insert the CONSOLE CONTROL CABLE from the
BASE FRAME through the CONSOLE MAST (RIGHT).
A
B Carefully slide the CONSOLE MAST (RIGHT) to the
BASE FRAME, then screw by 2 x hardware assembly
(Z01+Z03+Z04) and 1 x hardware assembly
(Z01+Z03+Z05).
Carefully slide the CONSOLE MAST (LEFT) to the
C
BASE FRAME, then screw by 2 x hardware assembly
(Z01+Z03+Z04) and 1 x hardware assembly
(Z01+Z03+Z05).
Z05x2
Z03x2
Z01x2
Z01 Z01
Z03 Z03
Z04 Z05
ASSEMBLY STEP 2
A
B
C
Z01x4
Z03x4
Z04x4
D
Z05x2
Z03x2
Z01x2
Open HARDWARE FOR STEP 2.
A Connect the console cable before attach.
B Attach CONSOLE SET onto CONSOLE MAST (RIGHT)
and CONSOLE MAST (LEFT).
C Screw CONSOLE MAST (RIGHT) by 2 x hardware
assembly (Z01+Z03+Z04) and 1 x hardware
assembly (Z01+Z03+Z05).
D Screw CONSOLE MAST (LEFT) by 2 x hardware
assembly (Z01+Z03+Z04) and 1 x hardware
assembly (Z01+Z03+Z05).
ATTENTION
DO NOT PINCH THE WIRE !!
Z01 Z01
Z03 Z03
Z04 Z05
6/18/19 1:54 PM
13