Prior To Operation - Metabo HPT CJ36DA Instructions De Sécurité Et Mode D'emploi

Scie sauteuse sans fil
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
○ When the power cord is not plugged into an outlet
and the battery runs out of power, power output will
stop and the USB power indicator lamp will shut off .
○ When the USB power indicator lamp goes out,
change the battery or plug the power cord into an
electrical outlet.
(4) When charging is completed
○ The USB power indicator lamp will not go out when a
USB device has been completely charged.
To verify charge status, check the USB device.
○ Turn the USB power switch OFF and unplug the
power cord from the electrical outlet. (Fig. 8)
○ Remove the battery from the charger and place the
rubber cover over the USB port.

PRIOR TO OPERATION

CAUTION
To avoid serious accident, ensure the switch is
in the OFF position, and pull out the battery.
1. Check the work area environment
Check the work area to make sure that it is clear of
debris and clutter.
Clear the area of unnecessary personnel. Ensure that
lighting and ventilation is adequate.
2. Power switch
Ensure that the switch is in the OFF position.
3. Dust produced in operation
The dust produced in normal operation may aff ect
the operator's health. Either of following way is
recommended.
a) Wear a dust mask
b) Use external dust collection equipment
Lever
Blade
Guide roller
holder
Fig. 10-І
14
When using the external dust collection equipment,
connect the adapter with the hose from external dust
collection equipment. (Fig. 9)
Base Rear hole
4. Changing blades
CAUTION
● Be sure to switch power OFF and disconnect the
battery from the body when changing blades.
● Do not touch the lever when plunger is moving.
● Never touch the blade immediately after use.
The metal is hot and can easily burn your skin.
(1) Pull the lever in the direction indicated by the arrow.
(Fig. 10-І)
(2) With the lever pulled, insert the blade until it butts
against the outlet of the blade holder tip. (Fig. 10-ІІ)
(3) Release the lever. (Fig. 10-ІІІ)
Blade
Fig. 10-ІІ
Fig. 10
Notch
Dust collection
adapter
Adapter Nose
Cleaner
Fig. 9
Blade holder
Guide roller
Fig. 10-ІІІ
Hook
Plunger

Publicité

Table des Matières
loading

Table des Matières