Broan Elite EQLD1 Serie Manuel D'installation, D'utilisation Et D'entretien page 6

LIGHTING/LIGHT INTENSITY CHANGE
To turn the lighting ON, touch the sensor corresponding to the desired lighting intensity and the
sensor will illuminate.
When the lighting is ON, touch the sensor corresponding to the active light intensity to turn the
lighting OFF and memorize the intensity.
The LED modules included with this hood are the latest in LED cooktop illumination technology
specially designed to operate in the elevated temperatures of cooking - offering bright lighting and
lasting up to 25 times as long as a standard bulb and greater reliability than typical replacement
LED bulbs.
FILTER CLEANING REMINDER
When it is time to clean the filters, the Filter Cleaning Reminder sensor will blink for 30 seconds
after the blower is turned off.
To reset the Filter Cleaning Reminder, touch and hold for 3 seconds this sensor while it is blinking.
ADDITIONAL INFORMATION
This control is light-sensitive; pointing directional spot lights towards it may cause it to malfunction.
In rare circumstances, the control could falsely be activated by an external light source.
OPTIONAL REMOTE CONTROL
For more convenience, this range hood can also be controlled using the HCR3 remote control
(purchase separately). For more details, see instructions included with the HCR3 remote control.
6