HBM TB1A Notice De Montage page 7

TB1A
Conversions and modifications
The transducer must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall ex
clude all liability on our part for any damage resulting therefrom.
Qualified personnel
Qualified personnel means persons entrusted with the installation, fitting,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
The transducer must only to be installed and used by qualified personnel,
strictly in accordance with the specifications and with safety requirements and
regulations. It is also essential to observe the appropriate legal and safety re
gulations for the application concerned during use. The same applies to the
use of accessories.
Prevention of accidents
According to prevailing accident prevention regulations, it is essential that
after mounting the transducers the user fits a cover or enclosure as follows:
• The cover or enclosure must not be able rotate.
• The cover or enclosure shall protect against crushing or cutting and provide
protection against parts that might come loose.
• The covers and enclosures shall be installed at a safe distance from
moving parts or shall prevent anyone putting their hand inside.
• The covers and enclosures shall even be fitted if the moving parts are
installed in areas to which persons do not usually have access.
The above regulations may only be diverged from, if machine parts are
already sufficiently protected owing to the design of the machine or because
other precautions have been taken.
A0162 7.0 en/de/fr
7
HBM