JumpTek 184-0770 Guide D'assemblage, D'utilisation Et D'entretien page 12

ASSEMBLY
Secure the trampoline netting to the trampoline frame using the tie-down srtings. Tie one end of the strings to any
one of the triangle-rings on the trampoline mat. Loop the other end of the strings through the enclosure hole on
the net and triangle-ring. Repeat the same process for all the strings until the enclosure netting is fully secured to
the trampoline mat.
Step 12: Attaching the Frame Pad
Place both Frame Pads (12) on the trampoline and secure them together with the pre-sewn hook-and-loop tapes
•
at the end of each pad.
12