Abus TVIP42562 Manuel Utilisateur page 110

Sensitivity
Determines the required intensity of the pixel change. The higher the value, the fewer pixel changes are
required to trigger motion.
Schedule
To save a schedule for motion-controlled recording, click on "Activate schedule". Specify here on which days
of the week and at which times the motion-controlled recording should take place.
The period selection is made by holding down the left mouse button. By clicking on an already marked period,
the details can also be set via keypad or deleted again.
To copy the time selection to other weekdays, move the mouse pointer behind the bar of the weekday already
set and use the "Copy to ..." function.
Apply the settings made by clicking "Save".
Linkage method
Here you can set the action to be performed following motion detection.
Normal Linkage
Send email:
Notify the surveillance centre:
Uploading to FTP/Memory card/NAS:
Audible warning:
Trigger recording
Enable this in order to record motion detections onto an SD card.
Apply the settings by clicking "Save".
Motion detection settings apply to the following linked actions:
E-mail, push to ABUS Link Station, notification monitoring center/CMS, acoustic
warning, single image transmission via FTP, SD
The recording on the built-in microSD card takes place with a default setting (full
screen, high sensitivity). This ensures that no events are lost.
If you have connected the camera via the ABUS Link Station, only precise motion
triggers appear in the "Messages" tab in the Link Station APP. Direct playback of
the sequence is possible.
However, the playback interface of the app (bar display) will show significantly more
recordings.
You receive an email as notification; check the checkbox to
activate this.
If an event is triggered, the ABUS CMS software can be
informed. You may then get a picture pop-up, for example.
Check this check box to upload single frames to an FTP server,
the SD card or a connected NAS drive during an event.
This function can output preset or custom tones or sound media.
This requires a camera model with audio output or an integrated
loudspeaker.
110