Leggett & Platt performance VIBRANCE Manuel Du Propriétaire page 7

STEP 2
Carefully lift the adjustable base frame from the
shipping carton, keeping the unit top-side-down.
STEP 3
Install (4) legs into the base frame. Simply screw each
leg into a tapped hole at each corner of the base frame
(FIGURE 1).
FIGURE 1
STEP 4
Remove and extend out power cord from the
protective packaging.
WARNING
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
STEP 5
Remove the plastic packaging from the adjustable base
frame. Carefully rotate the base frame over to position
the base top-side-up.
INSTALLATION
RECOMMENDED FOR HANDLING AND
LEGS – SCREW INTO
TAPPED HOLE AT
EACH CORNER
WARNING
AT LEAST TWO PEOPLE ARE
MOVING ADJUSTABLE BASE.
Vibrance™ Owners Manual 99301542-c
7