Schweizer eMag 43 Notice D'utilisation page 21

Problem
The battery indicator LED does not flash
green, even though the power adapter is
connected and plugged into a wall socket.
The NiMH batteries are not charging.
There are smudges or blemishes on the
screen.
The text is too small to read.
The text is too large to read.
Solution
Ensure that the small end of the power adapter is properly plugged
into the unit's power port.
Ensure that the outlet has power and is not malfunctioning. If the wall
outlet is connected to a wall switch, make sure that the switch is on.
Ensure that the small end of the power adapter is properly
plugged into the unit's power port.Ensure that the batteries are
inserted properly. Observe the correct polarity.Ensure that the
outlet has power and is not malfunctioning. If the wall outlet is
connected to a wall switch, make sure that the switch is on.
Clean the LCD display and the camera window.
Press the yellow magnification
magnification level.
Press the yellow magnification
a lower magnification level.
button to increase the
button to cycle through to
EN
21