Battery Status Led - Schweizer eMag 43 Notice D'utilisation

Battery status LED

Green solid: Batteries are charged, power adapter connected.
Batteries are charging, power adapter connected.
Green flashing:
Low battery status.
Red flashing:
Red solid: Error: disconnect power adapter, wait a few seconds and then reconnect it.
No LED: Batteries are charged, the power adapter is not plugged in or the eMag 43 is off.
Your eMag 43 is now ready for up to two hours of continuous use. When the batteries are low, the battery
indicator LED flashes red. Connect the power adapter and plug it in to recharge the batteries.
Note: Please note that after 30 minutes the eMag 43 switches to energy-saving mode (screen goes blank)
if no key is pressed during this time.
Press the On/Off Button to reactivate the eMag 43.
EN
13