RS Pro 124-4134 Manuel D'utilisation page 3

- Be sure the unit is grounded. Always connect power to a grounded
receptacle.
- Do not disassemble the pump.
- Do not modify the unit.
- Use recommended replacement parts.
- Do not wet the unit or use the unit with wet hands.
- Remove power cord by holding the plug – not the wires.
- Make sure the work area is well ventilated.
- The product is not intended for use by children or infirm persons without
supervision.
- Children should be supervised to ensure that they do not play with the
product.
I. Packing list and name of parts
Name of Parts
Soldering power switch
SMD rework
power switch
Air flow adjustment knob
SMD rework temperature
regulation knob
Packing List
1. 2 in 1 SMD Hot Air Rework Station
2. User's manual
3. Soldering iron
4. Soldering iron Stand
5. Heat Gun holder
6. Air nozzle x 3
7. Power cord
8. Plug adapter: one of each EU & UK power cord
SMD rework temperature display
Soldering temperature
display
SMD rework temperature calibration
Soldering temperature calibration
Socket for soldering iron
Soldering iron temperature
regulation knob
EN-2