Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
Warnings and cautions are placed at critical points in this manual to direct
the operator's attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in serious injury or
CAUTION: Failure to comply with a CAUTION may result in injury to the
NOTE : A NOTE indicates a procedure or point that is important to the process
being describe.
EXAMPLE : AN EXAMPLE is given to demonstrate a particular procedure, point
or process.
- Be sure to comply with following WARNINGS and CAUTIONS for your
safety.
WARNING
- Be sure not to operate the unit with any combination of temperature and air
flow settings that makes the thermal protector trip (the heater lamp turns off
during use). This could damage the unit.
CAUTION
When the power is ON, the temperature of the hot air and the nozzle
ranges from indoor temperature to 480°C ( 896°F). To avoid injury to
people or damage to items in the work area, observe the following:
- Do not direct the hot air towards people or touch the metal parts near the
nozzle.
- Do not use the product near combustible gases or flammable materials.
- Advise those in the work area that the unit can reach very high temperatures
and should be considered potentially dangerous.
- Turn the power OFF when no longer using or when leaving it unattended.
- Before replacing parts or storing the unit, allow the unit to cool and then turn
the power OFF.
To prevent accidents and failures, be sure to take the following
precautions:
- Do not strike the hand piece against hard surfaces or otherwise subject it to
physical shock.
death.
operator, or damage to the items involved.
EN-1
Publicité
