Marantz DV4100 Mode D'emploi page 25

Changing the 4-digit code
1
When disc playback is stopped, select ACCESS CONTROL in the
features menu using the w/v keys.
2
Enter the old code.
3
Move to CHANGE CODE using the w key.
4
Press the u key.
5
Enter the new 4-digit code.
6
Enter the code a second time and reconfirm by pressing OK.
7
Press t to exit the menu.
Note: If you forget your 4 digit code, it can be cancelled by
pressing 9 four times in the 'Access Control' dialog. You can then
enter a new code (twice!) as described above.
Parental Control Disclaimer
This DVD player features the PARENTAL CONTROL system which
is intended to activate when playing DVD discs furnished with
certain software coding. This is according to technical standards
adopted by the set maker and disc content industries.
Please note that the PARENTAL CONTROL system will not
operate a DVD disc which is not furnished with the appropriate
software coding. Also note that at the time of release of this DVD
player, certain aspects of the technical standards had not been
settled between set makers and the disc industries.
On this basis Philips cannot guarantee functioning of the
PARENTAL CONTROL system and denies any liability associated
with unintended watching of disc content.
If in doubt, please make sure the disc plays according to your
PARENTAL CONTROL settings before you allow children access.
PREPARATION 25